Skip to product information
1 of 20

Trident GTL – Friction Drive Telescope Mount with Absolute Encoders

Trident GTL – Friction Drive Telescope Mount with Absolute Encoders

Regular price €8.995,00 EUR
Regular price Sale price €8.995,00 EUR
Sale Sold out
If you live outside the EU, no VAT or tax has been charged, please check your country's import rules for relevant tax information. Shipping calculated at checkout.

The encoder Trident. Direct friction drive with 25-bit absolute encoders on both axes, up to 90 kg payload and OnStepX control. It always knows exactly where it is. Designed and made in the Netherlands.

Includes integrated Manticore controller, 25-bit absolute encoders, saddle, power supply, counterweight shaft and a 10 kg counterweight. Delivery in 3 months. 2-year warranty.

View full details

The Trident GTL is the Trident with absolute encoders. Every axis reads its own true position, all the time, so the mount knows exactly where it is from the moment it powers on. Built for remote observatories and imagers who want to trust their mount completely.

€8.995
Including Dutch VAT
90 kg
Payload*
25-bit
Absolute encoders on both axes
0.04″
Encoder resolution

Why the Trident GTL

Trident GTL telescope mount with absolute encoders, side view

It always knows where it is

25-bit absolute encoders read the real position of both axes directly. No homing run after a power cut, no lost position, no guessing: the GTL knows where it is pointing the moment it wakes up.

Telescope on a JTW mount in a remote observatory dome

Made for remote observatories

Absolute position, software limits, hardware end stops, a magnetic failsafe brake and a drive that slips in a collision. Because the encoders are absolute, the GTL needs no optical home or limit sensors.

See the safety features →

Trident GT carrying two telescopes side by side

More imaging from one pier

Carry two or three telescopes side by side on a JTW Atlas Array. One pier, one mount, far more data every clear night.

Customer guiding data at 25 kg and 65 kg

Smooth friction drive tracking

The same direct friction drive as the Trident GT: no gears and no backlash, with a slow, repeatable periodic error that guiding corrects easily. Under 0.3″ guided, straight out of the box.

Proven accuracy: customer guiding graphs from a Trident at 25 kg and 65 kg payload
Customer setup with a JTW Trident GT mount

Remote safety, built on absolute position

Because the encoders are absolute, the GTL needs no optical home or limit sensors: it always knows its true position.

Absolute encoders

The true position of both axes is read directly, at power-on and throughout the night. A power cut or a restart never leaves the mount lost.

Software limits

OnStepX limits and checks block unsafe moves, such as a GOTO with a wrong date, time or site, based on the position the encoders report.

Hardware end stops

Physical stops make travel beyond the axis limits impossible, whatever the software does.

Magnetic failsafe brake

Holds the mount in position when the power is off.

Slipping friction drive

In a collision the drive slips instead of forcing full motor torque through a rigid gear train, greatly reducing the risk of damage.

These features greatly reduce, but cannot completely rule out, events such as equipment striking the pier.

Specifications

Everything you need to plan your setup.

Trident GT with dual Losmandy saddles, side view
Mechanical
  • Payload: up to 90 kg*
  • Mount head weight: 24 kg
  • Drive: direct friction drive, bimetallic, the same as the Trident GT
  • Bearings: preloaded precision roller bearings
  • Brake: magnetic failsafe brake
  • End stops: hardware end stops
  • Latitude range: 0° to 90°
  • Azimuth adjustment: ±5°
  • Construction: aerospace aluminium and stainless steel, textured metallic powder coat
  • Maintenance: maintenance-free design
  • Dimensions: drawings and 3D model on our Support page
Encoders and performance
  • Encoders: 25-bit absolute on both axes
  • Encoder resolution: 0.04″
  • Encoder accuracy: 20″ over 360°
  • Position after power-off: read directly from the encoders, no homing needed
  • Periodic error: ±8″ typical, smooth and repeatable with a 16-minute period
  • Guided tracking: under 0.3″ out of the box
  • Drive resolution: 0.12″
  • Slew speed: 10°/s as standard, unlockable to 20°/s
Electronics and control
  • Controller: JTW Manticore (included), integrated in the mount with internal cabling, running open-source OnStepX
  • Homing and limits: absolute encoders, software limits and hardware end stops (no optical sensors needed)
  • Connectivity: USB, WiFi and Ethernet
  • Software: ASCOM and INDI drivers; mobile app as a hand pad
  • Motor drivers: Trinamic TMC2209, StealthChop silent tracking, SpreadCycle slewing, 256× microstepping, StallGuard4
  • Protection: overtemperature, short-circuit, overcurrent and driver fault
  • Connectors: aviation connectors
  • Operating temperature: −20 °C to +60 °C
Payload and installation notes

*Up to 90 kg is best achieved with several compact instruments, such as dual or triple setups, rather than one very large telescope. Balance, length and wind load matter as well as total mass. Send us your configuration and we will recommend a setup.

The JTW pier adapter is part of the azimuth adjustment. To fit another pier or tripod you need an intermediate plate unless the pier can be drilled to match. We make custom CNC plates on request.

Trident GT or Trident GTL?

Same Trident friction drive. The GT uses optical sensors; the GTL uses absolute encoders.

Feature Trident GT Trident GTL
Best forUnattended observatories, protected by optical sensors Absolute position at all times, from encoders
DriveDirect friction drive, bimetallic Direct friction drive, bimetallic
PayloadUp to 90 kg* Up to 90 kg*
Mount head weight22 kg 24 kg
Absolute encoders–25-bit, both axes
Optical home and limit sensors✓Not needed: absolute encoders
Hardware end stops✓✓
Position after a power cutRemembered (FRAM) Read directly from the encoders
Magnetic failsafe brake✓✓
Slipping drive in a collision✓✓
ControllerJTW Manticore, integrated JTW Manticore, integrated
CounterweightShaft and 10 kg weight Shaft and 10 kg weight
DeliveryBatch 1: order before 30 Nov 2026, ships before 31 Jan 2027 3 months (the encoders add a month)
Warranty2 years 2 years
Price incl. Dutch VAT €5.495 €8.995

Which one? The Trident GT protects itself with optical home and limit sensors and remembers its position between power cycles. The Trident GTL reads its true position from absolute encoders at all times, so it needs no optical sensors. Want the most payload for the lowest price? See the Trident Origin.

*Mass alone does not define payload. Balance, length and wind load matter as much as kilograms. Send us your configuration and we will recommend a setup.

Trident GTL friction drive telescope mount with 25-bit absolute encoders on both axes

In the box

Ready to mount on your pier and start imaging.

  • Trident GTL mount head with 25-bit absolute encoders
  • JTW pier adapter plate
  • Single Losmandy/Vixen saddle with brass clamps
  • Integrated JTW Manticore OnStepX controller
  • Power supply
  • Counterweight shaft and one 10 kg counterweight

Delivery in 3 months: the absolute encoders add a month to our standard lead time. 2-year warranty. Shipping typically €150 to €500 depending on destination, calculated at checkout. Outside the EU, prices are shown without Dutch VAT; local import duties are paid on delivery.

Questions about the Trident?

Payload, tracking, safety, software, installation and shipping: the answers to what customers ask us most.