Frequently asked questions

Trident FAQ

Answers to the questions we hear most about the Trident GT, Trident GTL and Trident Origin direct friction drive mounts. Can't find what you need? Send us a message and we will help.

What is a direct friction drive?

Instead of a worm gear or harmonic drive, a Trident turns each axis with a small drive roller pressed against a large precision disc. There is no gear mesh, so there is no backlash, and the periodic error is slow and smooth, which makes it easy for autoguiding to correct.

What happens if my telescope hits the pier?

The friction drive slips instead of forcing full motor torque through a rigid gear train. That greatly reduces the risk of damage to your telescope, camera and the mount itself. It is one of the reasons the Trident is well suited to remote observatories.

What is the difference between the Trident GT, GTL and Origin?

All three carry up to 90 kg*, track under 0.3″ guided and have software limits, hardware end stops, a magnetic failsafe brake and a drive that slips in a collision. The Trident GT is the fully equipped model: a bimetallic friction drive, an optical home sensor and optical overtravel sensors, and the Manticore controller built into the mount with internal cabling. The Trident GTL has the same drive and integrated controller, with 25-bit absolute encoders on both axes in place of the optical sensors. The Trident Origin is the workhorse: a solid stainless steel friction drive, homing and limits handled in software, and an external controller with external cabling. All include a counterweight shaft and one 10 kg counterweight.

What does the Trident GTL add?

The Trident GTL has 25-bit absolute encoders on both axes, with 0.04″ resolution. The encoders read the true position of each axis at all times, so the mount knows exactly where it is the moment it powers on: no homing run after a power cut and no lost position. Because the encoders are absolute, the GTL needs no optical home or limit sensors; hardware end stops are fitted as a physical backstop.

How much payload can a Trident carry?

Up to 90 kg* on the Trident GT, GTL and Origin. Mass alone does not define payload: the highest payloads are best achieved with several compact instruments on a JTW Atlas Array rather than one very long telescope, because balance, length and wind load matter as well as total mass. Send us your configuration and we will recommend a setup.

Can I mount more than one telescope?

Yes. With a JTW Atlas Array you can carry two or three telescopes side by side and collect far more data from a single pier. The Atlas Array is available on request.

How accurate is the tracking?

Typical periodic error is about ±8″, smooth and repeatable with a 16-minute period. With autoguiding, customers achieve under 0.3″ guided tracking straight out of the box. You can see real customer guiding graphs on the product pages.

Do I need autoguiding or PEC?

For long-exposure astrophotography we recommend autoguiding. Because the periodic error is slow and smooth, guiding corrects it easily. The Trident also supports optical PEC.

Is the Trident suitable for a remote or unattended observatory?

Yes, that is what it was designed for. Every Trident has software limits, hardware end stops, a magnetic failsafe brake and a drive that slips in a collision. For fully unattended sites the Trident GT adds an optical home position and optical overtravel sensors, and the Trident GTL reads its true position from absolute encoders at all times. The Trident Origin handles homing and limits in software.

What software does the Trident use?

Every Trident runs the open-source OnStepX control system on a JTW Manticore controller: built into the mount on the GT and GTL, as an external box on the Origin. It connects by USB, WiFi and Ethernet, with ASCOM and INDI drivers for NINA, Voyager, KStars/Ekos and other imaging software, and a mobile app that turns your phone or tablet into a hand pad. The SHC2+ wireless hand controller is available as an option.

What do I need to install a Trident?

A solid pier or tripod and 12 V power. The JTW pier adapter plate is part of the azimuth adjustment, so it fits our 1000 mm pier and custom equatorial pier directly. Other piers need an intermediate plate unless they can be drilled to match; we make custom CNC plates on request. Drawings and a 3D model are on our Support page.

What is in the box?

The mount head, JTW pier adapter plate, a single Losmandy/Vixen saddle with adjustable offset and brass clamps, the JTW Manticore controller (integrated on the GT and GTL, external on the Origin), a power supply, a counterweight shaft and one 10 kg stainless steel counterweight. Extra counterweights are available in 5, 10 and 20 kg.

What are the delivery time, shipping costs and warranty?

We build in batches. Trident GT and Trident Origin orders placed before 30 November 2026 are built in Batch 1 and ship before 31 January 2027. The Trident GTL is delivered in 3 months, because its absolute encoders add a month to our standard lead time. Every Trident comes with a 2-year warranty. Shipping depends on the destination, typically €150 to €500, and is calculated at checkout. Orders from outside the EU are shown without Dutch VAT, and local import duties and taxes are paid on delivery.

*Payload depends on configuration: balance, length and wind load matter as well as mass.

Ready to build your observatory around a Trident?

Compare the Trident GT and Trident Origin, or send us your setup and we will recommend a configuration.