Skip to product information
1 of 26

Trident GT - Direct Friction Drive

Trident GT - Direct Friction Drive

Regular price €5.495,00 EUR
Regular price Sale price €5.495,00 EUR
Sale Sold out
If you live outside the EU, no VAT or tax has been charged, please check your country's import rules for relevant tax information. Shipping calculated at checkout.

The JTW Trident GT is a direct friction drive equatorial mount built for remote observatories. It carries up to 90 kg*, protects your equipment with a five-layer safety system and runs on open-source OnStepX control. Designed and made in the Netherlands.

Why the Trident GT

  • Big payload, low cost. Up to 90 kg* of imaging equipment for €5,495 including Dutch VAT.
  • Safe for remote use. Five independent safety layers, from position memory and software limits to physical end stops.
  • More imaging from one pier. Carry two or three telescopes side by side on a JTW mounting arm and collect far more data from a single pier.
  • Smooth, backlash-free tracking. The direct friction drive has a slow, repeatable periodic error that guiding corrects easily: under 0.3″ guided, straight out of the box.

Remote safety system

  1. Position memory and software limits. Non-volatile FRAM remembers the mount's position between power cycles. Software limits and OnStepX checks block unsafe moves, such as a GOTO with a wrong date, time or site.
  2. Optical home position. A hardware reference that overrides software, so the mount can always recover its true position.
  3. Optical overtravel prevention. Optical sensors stop an axis at its limits, whatever the software says.
  4. Hardware overtravel prevention. Physical stops make travel beyond the limits impossible.
  5. Slipping friction drive. In a collision the drive slips instead of forcing full motor torque through a rigid gear train, greatly reducing the risk of damage.

These layers greatly reduce, but cannot completely rule out, events such as equipment striking the pier.

Specifications

Mechanical

  • Payload: up to 90 kg*
  • Mount head weight: 40 kg
  • Drive: direct friction drive, ceramic-metal hybrid
  • Bearings: preloaded precision roller bearings
  • Brake: magnetic failsafe brake
  • Latitude range: 0° to 90°
  • Azimuth adjustment: ±5°
  • Construction: aerospace aluminium and stainless steel, textured metallic powder coat
  • Maintenance-free design
  • Dimensions: see the drawings and 3D model on our Manuals and Drivers page

Performance

  • Periodic error: ±8″ typical, smooth and repeatable with a 16-minute period, easily handled by guiding or optical PEC
  • Guided tracking: under 0.3″ out of the box
  • Resolution: 0.12″
  • Slew speed: 10°/s as standard, unlockable to 20°/s

Electronics and control

  • Controller: JTW Manticore (included), running open-source OnStepX
  • Connectivity: USB, WiFi and Ethernet
  • Software: ASCOM and INDI drivers; mobile app turns any phone or tablet into a hand pad
  • Motor drivers: Trinamic TMC2209 with StealthChop for silent tracking, SpreadCycle for slewing, 256× microstepping and StallGuard4 stall detection
  • Protection: overtemperature, short-circuit, overcurrent and driver fault protection
  • Connectors: aviation connectors
  • Operating temperature: −20 °C to +60 °C

In the box

  • Trident GT mount head
  • JTW pier adapter plate
  • Single Losmandy/Vixen saddle with adjustable offset and brass clamps
  • JTW Manticore controller
  • Power supply
  • Counterweight shaft and one 10 kg stainless steel counterweight

Warranty and shipping

2-year warranty. Shipping costs depend on the destination, typically €150 to €500, and are calculated at checkout. Orders from outside the EU are shown without Dutch VAT; local import duties and taxes are paid on delivery.

Options and accessories

Notes

*Payload: up to 90 kg is best achieved with several compact instruments, such as dual or triple setups, rather than one very large telescope. Balance, length and wind load matter as well as total mass. Send us your configuration and we will recommend a setup.

Pier adapter: the JTW pier adapter is part of the azimuth adjustment. To fit another pier or tripod you need an intermediate plate unless the pier can be drilled to match. We make custom CNC plates on request.

View full details