In a permanent observatory the pier is the foundation of everything. A stiff, correctly sized pier lets your mount deliver the tracking it was designed for. A weak one adds vibration and flexure that no amount of guiding can remove. Here is what we look at when we help customers plan theirs.
1. Get the height right
The pier should be tall enough that the telescope clears the walls or roll-off roof at your lowest useful altitude, but no taller than it needs to be: every extra centimetre makes the structure less stiff. The answer depends on the observatory, the mount and the telescopes. We can 3D model your observatory and work out the correct height before anything is built.
2. Stiffness comes from diameter and wall thickness
A wide, thick-walled tube resists bending and torsion far better than a slim one. Our 1000 mm pier uses 200 mm diameter structural steel with a 10 mm wall, which is sized for heavy friction drive mounts like the Trident carrying multiple telescopes.
3. Isolate the foundation
The pier should sit on its own concrete foundation, separated from the observatory floor. That way footsteps, doors and the building itself do not shake the telescope. Use proper anchors and level the top plate carefully before fitting the mount.
4. Straight pier or equatorial pier?
A straight pier is simple and versatile. An equatorial (knee) pier is angled to your latitude and positions the mount so that it never needs a meridian flip. That means uninterrupted imaging sessions and simpler automation, which is a real benefit in a remote observatory.
5. Plan the adapter plate
On a Trident, the JTW pier adapter plate is part of the azimuth adjustment. It fits our piers directly. For another pier you need an intermediate plate unless the pier can be drilled to match; we make custom CNC plates on request. Mount drawings and a 3D model are available on our Support page.
6. Think about cables and power early
Decide where power, network and USB cables will run before the concrete is poured. Clean cable routing prevents snags as the mount moves, and it is much easier to plan than to retrofit. A Smart Saddle keeps dew control, USB and switched power on the mount, so fewer cables need to cross the axes.
Need help?
We build piers to any height and to your latitude. Tell us about your observatory and we will help you plan it.